PHOTO: MHI Vestas Delivers Able Seaton Port's 'First-Ever' Wind Turbine Components

Share:

Offshore wind turbine builder MHI Vestas has delivered the first-ever offshore wind turbine components to Able Seaton Port in Hartlepool, in the UK.

The components, including 15 blades produced at the Isle of Wight and finished at Fawley, are destined for RWE Renewables' Triton Knoll offshore wind farm.

The Able Seaton Port, renowned for end-of-life handling of offshore oil and gas platforms, is now receiving offshore wind turbine components for the first time in its history, after a combined multi-million pound investment has helped transform the port into a specialist assembly and construction facility for use on the project by MHI Vestas Offshore Wind.

Triton Knoll will install and operate 90 MHI Vestas state-of-the-art V164-9.5 MW turbines, each stretching 164 meters tip to tip, and capable of powering a typical home for up to 29 hrs with a single rotation of its 80 meter long blades.

The first 15 turbine blades to arrive at the port were manufactured by MHI Vestas at its Isle of Wight UK facility and finished at its Fawley plant across the Solent.

MHI Vestas Project Director Torben Damsgaard said: “We are proud that first components, including our blades from the Isle of Wight, for the V164-9.5 MW turbines have now been delivered to the pre-assembly site at Able Seaton. Our V164 turbines are currently the largest turbines installed in commercial projects in the world, and the 80m blades to be used at Triton Knoll will be the largest blades installed in UK waters.

MHI Vestas is committed to the UK, as not only are these world-leading blades produced in the UK, but the Triton Knoll project as a whole is bringing substantial value to local communities. The successful preparation of the Able Seaton site has been one key value driver, as the joint effort by AbleUK and MHI Vestas to prepare the site will pay dividends to the Teesside region as an offshore wind hub for the present and future.”

Local suppliers

MHI Vestas recently moved onto the 140,000 sq meter Able Seaton Port, where it is establishing a full turbine logistics and pre-assembly hub for the RWE-managed joint venture project.

During its site preparations, MHI Vestas says it has prioritized UK companies in the delivery of the project. ASP now hosts technicians on-site from local suppliers, including Global Wind Service (GWS), Dawson, and Boston Energy, as well as MHI Vestas employees. 

The main crane and Self-Propelled Modular Transporter (SPMT) to be used at ASP for moving turbine components will be supplied by Weldex, based out of Alfreton, UK. Finally, site stevedoring services are supplied by Able.

Julian Garnsey, Project Director for Triton Knoll and RWE Renewables, said: “Triton Knoll has made a significant investment into Able Seaton Port to establish wind turbine handling facilities there for the first time. It’s an investment that secures the North East of England at the very heart of the delivery of Triton Knoll, and which leaves a lasting legacy for future offshore wind farm projects to be constructed from the region.

"At Triton Knoll we remain committed to ensuring that our investments from this flagship project benefit local coastal communities, and the UK’s expanding offshore supply chain as much as possible. We are delighted to be working with MHI Vestas and Able UK delivering this new UK infrastructure, and to see the first Triton Knoll components arriving at Seaton, ready to begin installation early next year.”

Peter Stephenson, Able’s Executive Chairman said: “There is no doubt in my mind that offshore wind is fast becoming a key element not only in terms of clean power generation but also as a major factor that will drive the whole economy forward. The UK has the biggest market and our combined task is to seek to maximize local content and activity. We play our part by developing specialist future-proofed facilities that meet the demanding needs of our customer.”

The Triton Knoll offshore wind farm will have a maximum installed capacity of 857 MW. Once fully operational it will be capable of powering the equivalent of over 800,000 UK homes.

The wind farm site is located over 32 kilometers off the Lincolnshire coast, with a turbine array that covers an area of 145 square kilometers, bigger than the City of Manchester. It is jointly owned by RWE, J-Power and Kansai Electric Power, with RWE managing the wind farm’s construction and long-term operation and maintenance works, on behalf of its project partners.

No comments

More Popular Posts

About Crude Oil Facilitators

Crude Oil Facilitators are dedicated global brokers and facilitators of crude oil buying and selling. We work directly with crude oil buyers and crude oil sellers worldwide. We are a United Kingdom and Nigerian based firm, privately owned and devoted to the brokering of crude oil and other petroleum products buying and selling.

We have buyers and sellers of;

1. Nigerian Bonny Light Crude Oil, BLCO

2. D2 Diesel Fuel, JP54 Jet Fuel, Mazut etc.

3. Saudi Light Crude Oil, SLCO

4. Iraqi Light Crude Oil

If you are a buyer or seller of crude oil or other petroleum products or have mandate to buy or sell any of the above oil products, do contact us because we could be of help.

To contact Crude Oil Facilitators, click here ». To learn more about Crude Oil Facilitators, click here


Crude Oil Facilitators